Top Tee Cutter - Pipeline Technology Ltd
Product

PE Top Tee Cutter

Top Tee Cutter with a flexible universal joint enables work to be undertaken above the trench. This reduces how much excavation is required and increases usability as the operator needn’t bend over, which greatly and positively impacts the health and safety aspect of each job as the operative is removed from the confined space, reducing potential exposure to gas escapes. The Top Tee Cutter can also be used within a core hole and at varying angles up to 20 degrees on 25mm - 63mm Top Tees.

  • 12mm Hex Head
  • Stock Code: 7010-958

    £126.48 ex VAT

    Requirement

    The existing design of Top Tee Cutter (Tee Bar) is not user friendly. It does not give good mechanical advantage and if a Top Tee is located close to the side of a trench, further excavation of the trench side is required to enable the tee Bar handle to be rotated and the top tee cut.

    Case Study

    The development of a “long handled” Top Tee Cutter with a flexible universal joint enables work to be undertaken above the trench. This reduces how much excavation is required and increases usability as the operator needn’t bend over, which greatly and positively impacts the health and safety aspect of each job as the operative is removed from the confined space, reducing potential exposure to gas escapes. The Top Tee Cutter can also be used within a core hole and at varying angles up to 20 degrees on 25mm - 63mm Top Tees.

    Concept

    A “long handled” Top Tee Cutter with a flexible joint, will enable work to be undertaken without the operator having to bend over and if required it can also be used down a core hole.

    Features

    Pipetech was commissioned by SGN to complete this project,
    which was funded by the National Innovation Allowance

    FINDINGS

    Info User friendly.
    Info Improves health and safety.
    Info Reduces the cost of relaying a service.
    Info No excessive forces are imparted onto the PE pipe during cutting.
    Info Approved by SGN.


    Info

    Tabs

    Requirement

    The existing design of Top Tee Cutter (Tee Bar) is not user friendly. It does not give good mechanical advantage and if a Top Tee is located close to the side of a trench, further excavation of the trench side is required to enable the tee Bar handle to be rotated and the top tee cut.

    Case Study

    The development of a “long handled” Top Tee Cutter with a flexible universal joint enables work to be undertaken above the trench. This reduces how much excavation is required and increases usability as the operator needn’t bend over, which greatly and positively impacts the health and safety aspect of each job as the operative is removed from the confined space, reducing potential exposure to gas escapes. The Top Tee Cutter can also be used within a core hole and at varying angles up to 20 degrees on 25mm - 63mm Top Tees.

    Concept

    A “long handled” Top Tee Cutter with a flexible joint, will enable work to be undertaken without the operator having to bend over and if required it can also be used down a core hole.

    We have placed cookies on your device to help make this website better.

    Your Basket
    For Next Day delivery order in
    0
    Days
    10
    Hrs
    29
    Mins
    25
    Secs
    Contact Us